With registration, RTOs must juggle many responsibilities like annual declarations, AVETMISS reporting, and marketing compliance, where validation often causes the most anxiety.
Though we've written extensively on validation, let's clarify it again. ASQA describes it as a quality assessment review.
Essentially, validation is about identifying which parts of an RTO's assessment process are effective and which need improvement. With a proper grasp of its key aspects, validation becomes less daunting.
As per Clause 1.8 of the SRTOs 2015, RTOs are required to ensure that their assessment systems, including RPL, meet training package requirements and are conducted following the Principles of Assessment and Rules of Evidence.
As per the standards, two kinds of validation are required.
The primary validation type ensures compliance with the training package requirements for your RTO's assessments.
The subsequent validation confirms that assessments are conducted according to the principles of assessment and rules of evidence.
Therefore, validation is conducted both before and after the assessment. This article emphasizes the first type: assessment tool validation.
Breaking Down the Two Types of Assessment Validation
An Overview of Assessment Validation
As discussed before and in previous blogs, validation includes two processes: (1) assessment tool validation and (2) post-assessment validation.
Pre-assessment validation, also referred to as assessment tool validation, is related to the first part of the clause, ensuring all unit requirements are addressed and workbooks are entirely compliant.
On the implementation side, post-assessment validation ensures Registered Training Organisations conduct assessments according to the Principles of Assessment and Rules of Evidence.
In this article, we will emphasize assessment tool validation.
The Process of Assessment Tool Validation
Having discussed the two types of validation, let’s delve into assessment tool validation.
Timing of Assessment Tool Validation
Assessment tool validation is intended to confirm that all elements, performance criteria, and performance and knowledge evidence are met by your assessment tools.
This implies that any time new learning resources are obtained, assessment tool validation must be done before student use.
There's no requirement to wait for the next validation schedule in your 5-year cycle. Validate new resources promptly to ensure they’re appropriate for students.
Nonetheless, there are other reasons to conduct this type of validation. Perform assessment tool validation when you:
- you update your resources
- new training products are added to your scope
- course is reviewed against training product updates
- learning resources get identified as a risk during your risk assessment
ASQA applies a risk-based regulation approach, expecting RTOs to do regular risk assessments. Hence, student complaints about learning resources are a good reason for assessment tool validation.
Selecting Training Products for Validation
Keep in mind, this validation ensures that all learning resources comply before use. All RTOs must validate resources for each unit.
Resources Needed to Start Assessment Tool Validation
Learning Materials
Given that you are conducting assessment tool validation, you will need the full array of your learning resources:
Mapping tool – begin with this document. It details which assessment items correspond to unit requirements, aiding faster validation.
Learner/student workbook – validate its suitability as an assessment tool. Confirm that instructions are clear and answer fields are sufficient. This is a common problem.
Assessor guide/marking guide – ensure that instructions for assessors are sufficient and clear benchmarks for each assessment item exist. Clear benchmarks are essential for reliable assessment outcomes.
Other related resources – may consist of checklists, registers, and templates developed independently from the workbook and marking guide. Validate them to confirm they suit the assessment task and address unit requirements.
Panel of Validators
Clause 1.11 sets out the requirements for validation panel members, stating that validation can be conducted by one or more individuals. RTOs generally require all trainers and assessors to be involved, sometimes including industry experts.
As a group, your validation panel must possess:
Vocational competencies and industry skills pertinent to the unit being validated
Recent knowledge and skills in vocational teaching and learning
Any of the following training and assessment credentials:
TAE40116 Certificate IV in Training and Assessment or the next version
Validation instrument/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Using a validation tool is advantageous for both the validation process and documentation. It aids in viewing how each assessment item matches each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
It serves as documentation that you have validated your resources prior to student use.
Although ASQA does not recommend or require a particular template for assessment tool validation, many templates are available online. These tools typically have validators review the tools in their entirety to determine if they meet the principles of assessment.
Principles of Assessment Template Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
While such templates facilitate validation, they often result in judgment errors because there’s insufficient space for comments on each assessment item.
A more detailed template is highly recommended for inspecting each unit requirement and the assessment items that align with them. Below is an example:
Element Performance Criteria Assessment Guidelines Benchmarks Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Should Be Inspected?
As outlined in our blog post Common Problems In Assessment Tools, your assessment tools must ensure trainers follow assessment principles and evidence rules.
Essential Principles of Assessment
Fairness – Is the assessment process equitable and accessible to everyone?
Flexibility – Does the assessment offer multiple ways to show competence according to different needs and preferences?
Validity – Is the assessment testing what it is meant to test? Is it a valid tool for assessing the required skill or knowledge?
Reliability – Will the assessment give the same results every time, regardless of the trainer? Will different assessors make the same decision on skill competence?
Evidence Key Rules
Validity – Is the evidence showing that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there sufficient evidence to confirm the learner has the required skills and knowledge?
Authenticity – Does the assessment tool confirm that the work is the candidate’s own?
Currency – Do the assessment tools correspond to current units of competency and industry practices?
Even though these are regularly addressed in VET professional development and nationally recognised training, numerous tools fail to meet these requirements.
To prevent employing learning resources that miss some unit requirements, be sure to follow these guidelines:
Practice Your Teachings
Observe the verbs in the unit requirements and ensure they are click here addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:
Carry out each of the following tasks at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication per service and regulatory requirements:
nappy change
prepare bottles, feed infants from bottles, and clean equipment
solid food prep and feeding babies
respond properly to infant signs and cues
settle babies for sleep and prepare them
monitor and encourage age-appropriate physical exploration and gross motor skills
Having students describe the nappy-changing process for babies under 12 months doesn’t fulfill the unit requirement. Unless the requirement assesses underpinning knowledge (i.e., knowledge evidence), students should be doing the tasks.
Watch Out for the Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In the CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t meet the requirement.
Full Compliance or Not Competent
Observe the lists. As illustrated above, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Give More Specificity
Each assessment item must include clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Hence, ensure your instructions are clear and not confusing for students or assessors. For instance:
What kind of information can be included in a work package?
What kinds of information can be included in a work package?
Possible answers include:
Essential resources
Associated expenses
Time span of activities
Assigned roles and responsibilities
If an assessment item demands multiple answers, specify how many answers a student must provide. This ensures your assessment is reliable, and the evidence gathered is valid.
This is also true for assessment items with double-barrelled questions or questions that require more than one answer at once. Such questions can confuse both students and assessors, as illustrated in the example below:
Identify a hazard and/or environmental issue in the workplace and select the most effective hazard control hierarchy.
Possible answers include, but are not limited to:
Weather conditions – isolating the work area, engineering controls, personal protective equipment
Work area and ground conditions – elimination, isolation, use of engineering controls
People – isolating, use of engineering controls, administrative controls
Structural hazards – substitution, isolation, use of engineering controls
Chemical hazards – isolation, use of engineering controls, administrative controls
Equipment or machinery – isolating, engineering controls, administration
Avoiding double-barrelled questions makes it simpler for students to answer and for assessors to accurately judge student competence.
Given these requirements, you might wonder, “Don’t learning resource developers provide audit guarantees?” However, these guarantees require waiting for an audit to rectify noncompliance. This impacts your compliance history, so it’s better to take a safe and compliant route.